Product Specification; Installing The Wall Mount - Samsung VS20T755 Serie Manual Del Usuario

INSTALLATION

Product Specification

Model
Power
Rated
Battery specification
Charging time
Handy
Cleaning time
(Default : MID)
Turbo Action
Brush
❇ ❇ Charging and cleaning time may differ depending on the brushes and the conditions of use.
Installation

Installing the wall mount

CAUTION
• Install the wall mount on a hard concrete
wall.
– If you install the wall mount into drywall
and there is no stud present, use the
drywall anchors to secure the charger.
#1 Connecting the cable
• To disassemble the wall mount, follow steps
in reverse order.
VS20T755*** / VS20T751***
100-240 V ~ 50-60 Hz
Lithium-ion 21.6 V, 1800 mAh, 6 cell
Approximately 3 minutes (JET) / Approximately 5 minutes (MAX) /
Approximately 30 minutes (MID) / Approximately 60 minutes (MIN)
Approximately 5 minutes (JET) / Approximately 9 minutes (MAX) /
Approximately 18 minutes (MID) / Approximately 27 minutes (MIN)
#2 Positioning the wall mount
01 The wall mount installation should be set
02 Using the wall mount as a template, mark
03 Drill the holes to a depth of 50 mm (2 in)
04 Fix the wall mount to the wall with the
05 Plug in the wall mount, place the vacuum
550 W
3.5 hours
so the top of the wall mount is 113 cm
(44 1/2 in)from the floor.
where the screw holes will be placed.
using a 6 mm (1/4 in) drill bit, and put the
provided screw anchors into the hole.
provided screws.
into the wall mount, and then confirm that
the battery level indicator is displayed.
❇ ❇ Please refer to the QR code for
detailed information on the
installation of the wall mount.
English 11