Charging The Battery - Samsung VS20T755 Serie Manual Del Usuario

OPERATION
Operation

Charging the battery

• When the battery level indicator is at its
lowest level and blinks(
battery.
• When charging the vacuum, make sure
the connection part of the wall mount is
correctly connected.
• The vacuum cleaner cannot be used while it
is charging.
CAUTION
• Before ejecting the battery, the product
must be turned off. (If the battery is forcibly
ejected while the vacuum is operating, the
vacuum can malfunction.)
• Be careful not to drop the battery. If you
do, you can injure yourself or damage the
battery.
#3 Charging with a wall mount
• Make sure the back of the battery is
correctly placed onto the vacuum charging
part.
• Check if the battery level indicator is
displayed while charging.
• The battery level indicator blinks while
charging. When charging is complete, the
blinking stops and the light level dims.
#4 Charging with a desk charger
• Charge the battery at the desk charger.
• Push the battery in firmly.
• Check if the battery level indicator is
displayed while charging.
#5 Ejecting and re-inserting the battery
• Press the battery release button at the rear
of the handle to eject the battery.
• Push the battery to the end until you hear
it click.
12 English
) charge the
Storing the accessories
#6 At the wall mount
• When accessories are disassembled to be
stored, dust may fall from the suction part
of the vacuum cleaner.
• After cleaning, operate in MAX mode for
10 seconds.
#7 At the desk charger
• Place the desk charger on a desk after
folding the accessory holders and assemble
the accessories to the holders as shown in
the picture.
• If the Extension Crevice Tool is inserted first,
the accessory holders can be folded more
easily.
Operating the vacuum cleaner
If the brush clings to floors (such as a carpet,
a mat, or bedding, etc.) or does not spin
properly, change the suction power to 'MIN'
or 'MID' mode.
#8 �� Power (
) on / off
When pressing the power button, the vacuum
cleaner starts operation in 'MID' mode.
• When the wet brush is assembled, operation
starts in 'WET' mode.
#8 �� Controlling suction power
You can control the suction power of the
vacuum cleaner.
• + button: Increases suction power.
• - button: Decreases suction power.
❇ ❇ 'JET' mode: Hold the [+] button down for
3 sec. while in 'MAX' mode.
❇ ❇ The 'JET' mode is not displayed separately
on the screen.
❇ ❇ The suction power control button does not
work in 'WET' mode.
#9 Checking the display
01 Clogged: Something is clogging the
dustbin, pipe, or the connected suction
accessory.