Titan T9500 Manual Del Usuario página 34

4. Turn motorized nozzle right side up.
5. While holding the swivel, press handle release pedal and lower the swivel.
6. Lift rear latches up.
7. Grasp the side latches and pull out.
8. Lift cover upward from back to remove.
9. Note the position of all wiring. Lift agitator assembly out and remove worn belt.
10. Check and clean end cap areas. See AGITATOR ASSEMBLY (page 35) for picture
of complete agitator assembly.
Handle
Release
Pedal
Side
Latch
Rear
Latches
End Cap
-34-
Base