Light Bulb Changing - Titan T9500 Manual Del Usuario

2. Place agitator assembly back into motorized nozzle.
3. NOTE: Be sure that all wiring is tucked back in place.
4. Line up front of cover and base. Rest cover on front edge of base as shown.
6. Make sure there is no gap between the cover and base and that the rear latches are
snapped in place.
7. Turn motorized nozzle upside down and replace six (6) cover screws.
WARNING
Electrical Shock Or Personal Injury Hazard
Turn off and unplug vacuum cleaner before performing maintenance to the vacuum
vacuum cleaner suddenly starting.
NOTE: Use replacement bulb number 591007167, see part number detail in
REPLACEMENT PARTS (page 7).

LIGHT BULB CHANGING

-36-