Finishing The Installation - Beacon Lighting LUCCI PFC56-3B-ABS-US Serie Instrucciones De Instalación

Airfusion Whitehaven Installation Instructions
INSTALLATION OF THE CANOPY (Fig. 13)
•
Loosen the 2 screws at the bottom of the mouthing bracket.
•
Slide the canopy up to the mounting bracket and align the key holes on the canopy with the screws on the
mounting bracket. Turn the canopy until it locks into place with the narrow section of the key holes and
secure it by tightening the two screws. Avoid damaging the electrical wiring prepared previously.
•
Slide the canopy cover ring up to the canopy and click in to cover the canopy cover screws.
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 14)
1. Locate a suitable wall to fix the remote control holder with the 2 screws. (Fig.14a).
2. Slide the remote into the holder to rest the remote. (Fig. 14b)
7 | P a g e

FINISHING THE INSTALLATION

Fig. 13
Fig. 14a
Fig. 10
Fig. 14b