Electrical Wiring Diagram - Beacon Lighting LUCCI PFC56-3B-ABS-US Serie Instrucciones De Instalación

Airfusion Whitehaven Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
11. Turn the connecting nuts upward and push the wiring into the outlet box.
12. Carefully insert the Remote Receiver above the hanger ball in the remainder spacing in the mounting
bracket. Take care not to damage or loosen any of the wiring. (Fig. 12)
6 | P a g e

ELECTRICAL WIRING DIAGRAM

1. Hang the complete fan assembly onto mounting
bracket. (Fig. 9)
2. Connect the household live supply wire (black) to EMI
filter input wire (black, AC IN L) as shown in (Fig.11)
3. Connect the household neutral supply wire (white) to
EMI filter input wire (white, AC IN N).
4. Connect the household ground wire to the ground
wires (green) from EMI; Connect all ground wires (from
fan mounting bracket, downrod, receiver grond wires)
together using the twist connector.
5. Connect the EMI filter output wire (black, TO MOTOR
L) to Receiver input wire (black, TO MOTOR L).
6.Connect the EMI filter output wire (white, TO MOTOR
N) to Receiver input wire (white, TO MOTOR N).
6. Connect the output wires of receiver to the input wires
of the fan motor and the light kit by quickly connectors
10. Pull the saftey cable onto the securit hook and tight,
Fig. 11
lock the scew into the ceiling through the hole of
mounting bracket.
Fig. 12