Assembly Guide; Quickstart - NuWave Primo 20701 Manual Del Propietário

ASSEMBLY GUIDE

Lock
PROBE
10 10
assembly guide
Connecting Power Head to Dome
1. Place Power Head on rim
of Dome.
2. Lock into place by rotating Power
Head clockwise until the locking
lugs are engaged.
Assembling the Primo
1. Place Base on a firm, stable
surface. Do not place on
a stovetop.
2. Match the cutout of the
Base with the plug inlet of the
Grill Plate. Place Grill Plate
inside Base.
3. Connect power cord to Grill Plate.
4. Place food on Grill Plate.
5. Place Power Dome with Power
Head over food. Connect to the
Base. Dome should fit evenly
and securely onto Base.
6. If using Probe, insert plug of
Probe into Power Head (jack).
Next, insert other end of Probe
through hole in Power Dome and
lift up Power Head with Power
Dome. Insert Probe end properly
into food. Close down Power
Head with Dome.
7. Plug the Primo and press ON/
OFF.
8. Set cook time and temperature
according to recipe requirements.
9. After cooking, remove Dome
with Power Head and place onto
Dome Holder. Do not leave on
Dome Holder for extended period
of time as warping may occur.

QUICKSTART

ON/OFF
Press ON/OFF. This button also stops any cooking function. While
cooking, press ON/OFF to cancel.
START/PAUSE
Select a cooking function, press START/PAUSE to begin cooking.
Cooking temp range 50˚F - 400˚F.
WARM/REHEAT
For WARM, press WARM/REHEAT. Press START/PAUSE to begin.
For REHEAT, press and hold down WARM/REHEAT for 1 second.
The Primo will begin automatically.
PREHEAT
Press PREHEAT. The temp and time are adjustable using Up or
Down arrows. To begin, press START/PAUSE. Once it has reached
the set temperature, the Primo will beep twice and automatically begin
to cook. To begin cooking, press START/PAUSE.
SEAR
Press SEAR. If preferred, adjust Sear temp and time and press
START/PAUSE.
PROBE
Plug the Probe into the Power Head (jack). Press PROBE. Set Probe
target internal temperature for food using the Up or Down arrows. Bring
through hole and insert the Probe into your food. Press START/PAUSE
to begin cooking.
PROG
Press PROG and press the Up or Down arrows to choose preset
items (1-100) to cook. Press START/PAUSE to begin the chosen
program. Press Up or Down arrows when in each cooking function to
adjust temps and times.
TOP/BTM
Press TOP/BTM and press Up or Down arrows to adjust TOP
percentage. As the TOP percentage changes, so will the BTM. Press
TOP/BTM again to adjust BTM. As the BTM percentage changes, so
will the TOP. The Top/BTM defaults are 30%/70%.
STAGE
To add a cooking stage, press STAGE once and adjust temperature
and time by pressing the Up or Down arrows.
50
50
11 11
nuwavenow.com nuwavenow.com