NuWave Primo 20701 Manual Del Propietário página 9

INSTRUCTIONS
• The Primo will cook your food at selected temperature and
time, sear at 400°F for 10 minutes, and then finish cooking
and display End.
STAGE Function
You can program a maximum of 5
stages into your Primo.
1. Press ON/OFF. This is Stage
1 cooking.
• Adjust cooking temperature
by pressing the Up or
Down arrows.
• Adjust cooking time by
pressing TEMP/TIME. Press the Up or Down arrows to adjust
the time.
2. Press STAGE.
• To adjust the cooking
temperature press the Up or
Down arrows.
• Adjust cooking time by
pressing TEMP/TIME. The
display will show TIME,
STAGE 2, and 00:00. Press the Up or Down arrows to adjust
the desired cooking time.
3. Press STAGE again to program a third stage of cooking. The
display will show default cooking temperature 350°F, TEMP, and
STAGE 3.
• To adjust the cooking temperature for stage 3, press the Up or
Down arrows to adjust your desired cooking temperature.
• Adjust cooking time by pressing TEMP/TIME. The display
will show TIME, STAGE 3, and 00:00. Press the Up or Down
arrows to adjust your desired cooking time.
4. Press START/PAUSE to begin cooking. The Primo will cook,
following the stages that were programmed.
• A maximum of 5 stages can be programmed.
Example: Cook Stage 1 at 300°F for 17 min. » Cook Stage 2 at
360°F for 30 min. » Cook Stage 3 at 400°F for 5 min.
1. Press ON/OFF. Press the Up or Down arrows to adjust cooking
temperature to 300˚F.
2. Press TEMP/TIME. Press the Up or Down arrows to adjust
cooking time to 00:17.
3. Press STAGE. Press the Up or Down arrows to adjust cooking
temperature to 360˚F.
16 16
instructions
50
50
50
50
4. Press TEMP/TIME. Press the Up or Down arrows to adjust
cooking time to 00:30.
5. Press STAGE again. Press the Up or Down arrows to adjust
cooking temperature to 400˚F.
6. Press TEMP/TIME. Press the Up or Down arrows to adjust
cooking time to 00:05. Press START/PAUSE.
PROG Function
The Program button represents
Memory Entry and Memory Recall.
Preset Programs
Preset Programs given numbers 1 to
100 and can be adjusted.
To recall a preset program:
1. Press ON/OFF.
2. Press PROG.
• Choose the program number (1-100) by pressing the Up or
Down arrows.
• Once program number is chosen, press START/PAUSE.
The Primo will cook your preprogrammed recipe.
Note: Preset temperatures and times for program recipes 1-100 can
be adjusted. Adjusted temps and times will not be saved when a
program number (1-100) is recalled once again.
To program your own recipe:
1. Press ON/OFF.
2. Press PROG. The display will show PROG and 101.
3. Press Up or Down arrows to choose the program number to save
a recipe to. Program numbers can be chosen between 101-150.
4. Press PROG again to save your recipe to the desired
program number.
Note: 101 to 150 can be preprogrammed for your own saved recipes.
Program your recipe after cooking:
1. Press ON/OFF.
2. Set cooking functions including temperatures and times.
3. Press START/PAUSE.
4. Once cooking is finished and End is displayed, press PROG.
The display will show PROG and 101.
5. Press Up or Down arrows to choose the program number to
save your recipe to. Program numbers can be chosen between
101-150.
6. Press PROG again to save your recipe to the desired
program number.
17 17
nuwavenow.com nuwavenow.com