Tascam CD-400U DAB Manual Del Usuario página 13

PHONES
q
Use this standard stereo jack to connect stereo headphones.
Use an adapter to connect headphones with a mini plug.
Use the PHONES knob to adjust the headphone output level.
PHONES jack output can be lowered up to −18 dB in 1dB in-
tervals using the A.Out Att. setting screen. (see "Adjusting
the analog output" on page 40)
CAUTION
Before connecting headphones, minimize the volume with
the PHONES knob. Failure to do so could result in a sudden
loud noise that could harm hearing, for example.
AUX IN jack
w
This stereo mini jack is an audio line input jack.
Connect a portable digital player or other external audio de-
vice here. (see "Using the AUX IN jack" on page 40)
CAUTION
i Before connecting another device to the AUX IN jack, mini-
mize the volume of that device. Failure to do so could result
in a sudden loud noise that could harm hearing, for example.
i Before connecting or disconnecting with the AUX IN jack, set
the current source to something other than AUX (CD or Blue-
tooth) or turn the unit off.
Remote control signal receiver
e
Signals from the wireless remote control (TASCAM RC-CD400)
are received here. When operating the remote control, point it
toward this receiver.
1 [LOCK] button
r
i Press to input track number 1 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the unit is in shift mode (SHIFT indicator lit), press to
turn the panel lock function (which disables button use to
prevent misoperation) on/off. (see "Panel lock functions" on
page 22)
NOTE
i The number buttons on the unit (1 [LOCK] – 0 [DUB]) can be
used to specify numbers for track selection. For track num-
bers, a maximum of two digits can be input for audio CDs and
three digits for data CDs. (see "Selecting tracks directly" on
page 25)
i When in SHIFT mode (SHIFT indicator lit), pressing a number
button will change the setting of the function shown in white
lettering below the button.
2 [P.O.PLAY] button
t
i Press to input track number 2 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When in SHIFT mode (SHIFT indicator lit), press to turn the
power-on-play function on/off. (see "Using the power-on-
play function" on page 29)
2 – Names and Functions of Parts
3 [P.MODE] button
y
i Press to input track number 3 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is CD, USB or SD, and shift mode is
active (SHIFT indicator lit) press to cycle through the play-
back modes (ordinary, single and random). (see "Playback
modes" on page 27)
4 [REPEAT] button
u
i Press to input track number 4 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is CD, USB or SD, and shift mode is
active (SHIFT indicator lit) press to turn the repeat playback
function on/off. (see "Ordinary repeat playback settings" on
page 28)
5 [A-B REP] button
i
i Press to input track number 5 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is CD, USB or SD, and shift mode is
active (SHIFT indicator lit) press to set the A-B repeat func-
tion starting (A) and ending (B) points. (see "A-B repeat play-
back settings (audio CDs only)" on page 28)
6 [A. PRESET] button
o
i Press to input track number 6 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is DAB or FM and shift mode is ac-
tive (SHIFT indicator lit) press to automatically program the
preset stations. (see "Setting radio station presets automat-
ically" on page 34)
7 [M.PRESET] button
p
i Press to input track number 7 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is DAB or FM and shift mode is ac-
tive (SHIFT indicator lit) press to manually program the pre-
set stations. (see "Setting radio station presets manually" on
page 34)
13
TASCAM CD-400U DAB