Rear Panel - Tascam CD-400U DAB Manual Del Usuario

Rear panel

ANTENNA DAB connector
z
Connect the included FM antenna here.
Extend the antenna and attach it to a window frame, wall or
other surface where it provides the best reception.
TUNER OUT jacks
x
These analog RCA pin output jacks always output the sound
from the tuner.
The nominal output level is -10 dBV.
RS-232C connector
c
This is a 9-pin D-sub RS-232C control input/output connector.
Connect a computer, for example, here. (see "Using the RS-
232C connector" on page 40)
Option slot
v
This slot is for installation of an Ethernet card (sold separately).
ANALOG OUT (UNBALANCED) L/R jacks
b
These are analog RCA pin output jacks.
The default nominal output level is –10 dBV (OFF analog out-
put level setting), but it can also be lowered in 1dB increments
to −28 dBV (-18dB analog output level setting). (see "Adjusting
the analog output" on page 40)
ANALOG OUT (BALANCED) L/R jacks
n
These are balanced XLR analog output jacks.
The default nominal output level is +4 dBu (OFF analog output
level setting), but it can also be lowered in 1dB increments to
–14 dBu (-18dB analog output level setting). (1: GND, 2: HOT, 3:
COLD) (see "Adjusting the analog output" on page 40)
AC IN connector
m
Connect the included power cord here.
2 – Names and Functions of Parts
15
TASCAM CD-400U DAB