H.I. (Height Of Instrument) Alert - Wacker Neuson VAL 300 Manual De Operación

All manuals and user guides at all-guides.com
VAL 300
2.5

H.I. (Height of Instrument) Alert

See Graphic: wc_gr004594
2.5.1 The H.I. Alert feature stops the laser automatically and sounds an
alarm if the laser is disturbed, preventing inaccurate readings. It
functions only when selected.
2.5.2 To activate this safeguard feature, press the H.I. Alert Function key
(10) after turning the laser on. The H.I. Alert Indicator LED (11) will
blink rapidly while the laser is self-leveling.
2.5.3 About 30 seconds after the head starts to rotate, the LED will blink
slowly, indicating the H.I. Alert is activated.
2.5.4 If the laser is disturbed while in H.I. Alert mode, the head will stop
rotating, the beam will turn off, the LED indicator will stay on
continuously, and an alarm will sound for 30 seconds.
2.5.5 To reset the laser after an H.I. Alert, turn the laser off and turn it on
again. Check to see if the beam elevation has changed from its original
benchmark position.
2.5.6 The laser is no longer in H.I. Alert mode. Press the H.I. Alert Function
key to return to H.I. Alert.
2.5.7 While using the laser, check periodically to make sure that it has not
been moved and that your settings are still accurate.
wc_tx000802gb.fm
EN-12
Operation