Descargar Imprimir esta página

Beko QWIK-PURE 200 Instrucciones De Montaje Y De Uso página 24

Ocultar thumbs Ver también para QWIK-PURE 200:

Publicidad

Maintenance • Mantenimiento
Entretien • Manutenção
24
Prior to maintenance work:
• Shut off condensate inlet (if necessary
switch off compressor).
• If there is an in-built heating system,
disconnect the device from the power
supply!
General cleaning of QWIK-PURE
(recommended every 12 months)
3
1
Empty main tank
Clean main tank.
Note:
Do not add any cleaning agents (sur-
factants or flammable cleaners)! They
impair the filter efficiency.
After cleaning:
2
Insert new filter set (see page 24).
2
Insert new filter mat.
3
Fill QWIK-PURE
water (see page 20).
2
After maintenance work
• Open condensate inlet.
• If there is an in-built heating system,
reconnect the power supply.
1
english
®
unit with clean
®
QWIK-PURE
200, 350
®

Publicidad

loading

Este manual también es adecuado para:

Qwik-pure 350