Publicidad
Idiomas disponibles
Idiomas disponibles
Tuck the plastic strip behind metal tabs and along
side rails. Plastic strip will tuck between the metal
sides.
Roll up the Soft Top Deck to make installation to the Flip Top Plates more manageable. TIP: It may be helpful to
have a second person for this step. Place the top face down and re-fold, beggining with the rear portion.
Lift the Trail view soft top and header channel
assembly onto the windshield gasket. 2 person help
makes this easier.
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX 800-438-3788
29
Secure the Flip Top Header Assembly to the Soft
Top Deck by engaging the Hook and loop flap
around the tube.
32
Place pivot tubes over the mount hing plate. Install
shoulder bolt and nut using allen key wrench. Nut
goes to inside of vehicle and fits into plastic.
30
31
33
Publicidad
