Troubleshooting - AEG Deli 3 Sport Manual Del Usuario

CLEANING AND CARE
Always unplug the appliance before cleaning.
1 Motor Housing. Never immerse the blender base in water! Clean it only with a damp cloth.
Do not use abrasive cleaners, scouring pads or abrasive detergents while cleaning the appliance.
2 Jars * (4,7, 10), blade sets * ( 3,9 ) and lids * ( 5,8,11) and measuring cup are dishwasher safe.
If washing by hand, don't use wire brush, steel wool or bleach to avoid rust.
Notes: Always detach the blade sets ( 3,9 ) from jars for cleaning to ensure no leftover food stuck in between.
WARNING !
the blades are very sharp. Handle carefully during cleaning.
* available in certain models only.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
You cannot Blender is not connected to
activate or electrical supply.
operate
The bottle and blade assembly are
the blender.
not installed correctly in the blender
base. The safety interlock system
prevents the machine to power on.
There is functional problem.
Blades do not The motor is overheated.
turn when
processing.
The blades stalls Ingredients are too large.
or machine stops
during operation.
Wrong ingredients.
( picture page '6' )
SOLUTION
Check your home power supply and replug.
Make sure the blade set is fastened and
the jar is perfectly fitted on the blender base.
(The position symbol on jar base aligned with
lock symbol on blender base)
Contact authorized service centre.
If the motor stalls, turn the blender of f
immediately, unplug the appliance and
let it cool for at least 20 minutes.
Cut all firm fruits and vegetables into pieces no
large than 1.8cm² to 2.5cm² or reduce some food.
Glass jar and takeaway bottle intended use is
production of beverages. Add fruits, vegetables
or similar. Never mix ingredients such as dough,
mashed potatoes, meat or similar.
While grinder intended use is grinding tough
ingredients like nuts, co ee bean and dried chili.
BG
NL
EN
FR
DE
GR
PT
ES
AR