Before First Use; Assembling The Appliance; Using The Appliance - Wilfa 2GO XL Manual De Instrucciones

BEFORE FIRST USE

EN
Clean the units and parts thoroughly before you use the appliance for the first
time.
Note: The blades are very sharp. Wash with care. Never touch the blades with
your finger.

ASSEMBLING THE APPLIANCE

• Put your preferred ingredients into the bottle. Do not fill over the maximum
line.
• Screw the blade assembly onto the bottle.
• Place the adapter onto the base.
• Turn the bottle upside down, with the blade assembly onto the base, and
twist the bottle until it clicks into place.

USING THE APPLIANCE

• Make sure the indicator is set on 0 when you place the bottle.
• After assembling the bottle onto the blender, the available programs light up
on the display.
• Choose the preferred pre-set program by turning the wheel anti-clockwise.
• Select speed manually by turning the wheel clockwise.
• Press and hold pulse on the display if you want to use the pulse function. The
motor will increase to full speed. It returns to stand by when you release your
finger from the display.
• Keep one hand on the bottle while blending.
• Do not blend more than 3 minutes with the 2GO bottle.
Note: When the bottle is connected to the main unit, the hot soup program is
deactivated, and the manual speed is running on 50%.
INSTRUCTION MANUAL · 2GO XL
6