CRUISE CONTROL
See Figure 10.
The cruise control can be used to operate the blower without
holding the switch trigger.
To engage the cruise control:
Depress the switch trigger and stop at the desired speed.
WARNING:
To avoid serious personal injury, always remove the bat-
tery pack from the product when cleaning or performing
any maintenance.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes resulting in possible serious injury.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause
product damage.
NOTICE:
Periodically inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or a quali-
fied service center for assistance.
This product has a Five-year Limited Warranty for personal, family, or
household use (90 days for business or commercial use). For warranty
details, visit www.ryobitools.com or call (toll free) 1-800-525-2579.
OPERATION
Push cruise control lever down.
Release switch trigger.
To release the cruise control, pull cruise control lever all
the way up.
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which can result in serious personal injury.
STORAGE
Clean all foreign material from the blower.
Store indoors in a secure place that is inaccessible to
children. Keep away from corrosive agents such as garden
chemicals and de-icing salts.
Do not hang unit so that the switch trigger is depressed.
The hanger bracket may be used to store your blower on
the wall and out of the way.
NOTE: Make sure the hook used for hanging will support
the weight of the blower and is securely mounted into a
wall stud.
9 — English
WARNING: