Operator Safety While Using Internal Combustion Engines; Service Safety - Wacker DS720 Manual De Operación

1A OPERATION
1.3

Operator Safety while using Internal Combustion Engines

Internal combustion engines present special hazards during operation and fueling! Failure to follow the safety
guidelines described below could result in severe injury or death.
DO NOT smoke while operating rammer.
DO NOT smoke when refueling engine.
DO NOT refuel hot or running engine.
DO NOT refuel engine near open flame.
DO NOT spill fuel when refueling engine.
1.4

Service Safety

Poorly maintained equipment can become a safety hazard! In order for the equipment to operate safely and properly
over a long period of time, periodic maintenance and occasional repairs are necessary.
DO NOT attempt to clean or service rammer while it
is running.
DO NOT operate rammer with safety devices or
guards removed or not in working order.
DO NOT operate rammer without air cleaner.
DO NOT remove air cleaner paper element,
precleaner, or air cleaner cover while operating
rammer.
DO NOT alter engine speeds. Run engine only at
speeds specified in Technical Data Section.
1A-4
All manuals and user guides at all-guides.com
! DANGER
DO NOT operate rammer near open flames.
ALWAYS refill fuel tank in well-ventilated area.
ALWAYS replace fuel tank cap after refueling.
ALWAYS check fuel lines, fuel cap, and fuel tank for
leaks and cracks before starting engine. Do not run
machine if fuel leaks are present, or fuel cap or fuel
lines are loose.
! WARNING
ALWAYS replace safety devices and guards after
repairs and maintenance.
ALWAYS keep area around muffler free of debris in
order to reduce the chance of an accidental fire.
ALWAYS do Periodic Maintenance as recommended
in Operator's Manual.
ALWAYS clean debris from engine cooling fins.
ALWAYS replace worn or damaged components
with original spare parts designed and recommended
by WACKER for servicing this rammer.
DS720