Using On-Screen Menu; Using The Menus - NEC HT1100 Manual Del Usuario

USING ON-SCREEN MENU

Using the Menus

1. Press the MENU button on the remote control or the projector cabinet to display the menu.
Submenu
The Picture menu will be displayed (factory preset).
NOTE: The commands such as
2. Press the SELECT buttons on the remote control the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab.
4. Use the SELECT buttons on the remote control or the projector cabinet to select the item you want to adjust or set.
You can use the SELECT
NOTE: You can select a tab only when the tab color is blue.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
NOTE: You can also display a submenu window by pressing the SELECT
6. Adjust the level or turn the selected item on or off by using the SELECT
projector cabinet.
7. Press the ENTER button or the CANCEL button on the remote control or the projector cabinet.
Changes are stored until you adjust it again.
ENTER .......... Stores changes.
CANCEL ........ Returns to the previous screen without storing changes.
8. Repeat steps 2 -7 to adjust an additional item, or press the CANCEL button on the remote control or the projector
cabinet to quit the menu display.
All manuals and user guides at all-guides.com
, ENTER, CANCEL in the gray bar show available buttons for your operation.
buttons on the remote control or the projector cabinet to select the tab you want.
Submenu window
button.
buttons on the remote control or the
E-25
Main menu
Currently available buttons