Makita GTP01 Manual De Instrucciones página 8

ASSEMBLY
CAUTION:
Always make sure that your
fingers are not placed on the switch trigger or
the contact element and the battery cartridge is
removed before carrying out any work on the pin
nailer.
Loading and unloading pin nails
CAUTION:
Always make sure that your fin-
gers are not placed on the trigger and the battery
cartridge is removed before loading pin nails.
Unintentional firing may cause personal injuries and
property damage.
CAUTION:
Avoid slamming the slide door of
the magazine open and shut while pin nails are
loaded in the magazine. Accidentally dropping pin
nails especially when working in high places may
cause personal injuries.
1. Press the lock lever and open the slide door of the
magazine.
3
Fig.8
► 1. Lock lever 2. Slide door 3. Magazine
2. Set a pin nail strip with dotted triangles pointing
downwards, aligning the tips of pin nails with the guide
grooves at the bottom of the magazine. Make sure the
nail tips touch the bottom of the magazine, and then
gently slide the pin nail strip towards the driver guide.
4
Fig.9
► 1. Pin nails 2. Dotted triangle 3. Guide grooves
4. Driver guide
2
2
3 1
2 1
Fig.10
► 1. Pin nails 2. Bottom of magazine 3. Clearances
NOTICE:
Make sure the tips of pin nails to be
placed firmly on the bottom of the magazine. Any
clearances around the tips of pin nails may cause
jamming and damages to the tool.
NOTICE:
Load pin nails in the correct direction.
Loading in wrong direction may cause premature
wear and tear of the driver and damage to the other
parts.
NOTICE:
Do not use deformed pin nail strips.
Use pin nails specified in this manual. Using pin
nails other than those specified may cause nail jam-
ming and breakage of the tool.
NOTICE:
Avoid loading nail strips of fewer pin
nails, especially when using pin nails in short
1
lengths. It may cause jamming and damages to the
tool.
NOTICE:
Do not load nail strips of different
lengths or multiple nail strips of fewer pin nails at
one time. It otherwise may cause jamming and dam-
ages to the tool.
3. Return the slide door to the original position and
lock it in place with the lock lever.
NOTICE:
Close the slide door gently. Applying
excessive force may cause deformation to the pin
nails, and the side door may not return to the original
position.
To remove the pin nails, press the lock lever and slide
the slide door open. Take out the pin nails from the
magazine.
8 ENGLISH
3 3