Publicidad
Idiomas disponibles
Idiomas disponibles
3 Ensure that all the PowerVault MD1000 enclosures are powered up before you power up the server.
4 Power up the server.
The PERC 5/E Adapter should recover without any additional user intervention or warning/error
messages. However, depending on the actual cause of the loss of communication error, a warning/error
message may be displayed at power-on self-test (POST). If this occurs, enter the Ctrl-R utility. For more
information on the Ctrl-R utility, see the Dell PERC5/E Adapter User's Guide.
Warning Messages During POST
The Foreign Configuration warning message and the Failed Virtual Disks warning message may appear
during POST.
Foreign Configuration
If the PERC 5/E Adapter reports foreign configuration, enter the Ctrl-R utility, and then import the
foreign configuration.
Failed Virtual Disks
If one or more virtual disk(s) are spanned across two or more Dell PowerVault MD1000 enclosures,
the Failed Virtual Disks warning message appears. This warning message also appears if a PowerVault
MD1000 in split mode is shared by one server.
Perform the following steps to resolve the Failed Virtual Disks warning message:
1 During POST, press <Ctrl><R> to enter the Ctrl-R utility.
2 Find the virtual disk(s) marked as Failed and record all the details from the Properties screen.
NOTE:
Record all settings, including RAID level, physical disk members, physical disk order (sequence),
virtual disk size, and stripe (element) size.
3 Using the Ctrl-R utility, delete the failed virtual disk.
4 Clear the remaining foreign configuration in the Ctrl-R utility.
5 Using the Ctrl-R utility, re-create the original virtual disk with the identical parameters recorded
in step 2.
NOTE:
Do not initialize the new virtual disks.
6 Exit the Ctrl-R utility and boot to the operating system.
____________________
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, PowerEdge, PowerVault, and Dell OpenManage are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
All manuals and user guides at all-guides.com
Publicidad
