EAS ELECTRIC EMV72VAP Manual De Instrucciones página 62

Change the power cord
Position A show the terminal box position on the back of the back outer case
and it's closed.
Steps:
a. cut off the power, use small fat screwdriver to open the two
snaps (1, 2).
b. use Phillips screwdriver to take off screws 3, 4, 5 and 6.
c. change the new power cord, fix the yellow/green wire on 3,
brown wire on 4, blue wire on 5.
d. twist screw 6 to close the terminal box cover and finish the
changing.
A
back outer case
brown {L}
yellow/green
power cord
blue {N}
27
3 4
1 2
5
6
terminal box
V.1