Resetting The Adjustments; Resetting A Single Adjustment Item; Resetting All Of The Adjustment Data For The Current Input Signal; Resetting All Of The Adjustment Data For All Input Signals - Dell UltraScan P990 Guia Del Usuario

DELL P990(E).book Page 13 Friday, December 4, 1998 2:36 PM

Resetting the adjustments

This monitor has the following three reset methods. Use the RESET button to reset the
adjustments.

Resetting a single adjustment item

Use the MENU button to select the adjustment item you want to reset, and press the
RESET button. You can do this while you are adjusting an item.
Resetting all of the adjustment data for the current input
signal
Press the RESET button when no menu is displayed on the screen.
Note that the following items are not reset by this method:
•
on-screen menu language (page 1-9)
•
on-screen menu position (page 1-9)
•
control lock (page 1-9)

Resetting all of the adjustment data for all input signals

Press and hold the reset button for more than two seconds when no menu is displayed on
the screen. This resets everything to the factory preset mode.
NOTE: The RESET button does not function when
All manuals and user guides at all-guides.com
(CONTROL LOCK) is set to ON.
Using the Monitor 1-13