Web Access; Ethernet Connection; Web Connection; User Type - Premium EPS-120-5192 Manual De Operación

2

WEB ACCESS

This section specifies the steps to follow to enable web access to the device.
2.1 E
THERNET CONNECTION
An active Ethernet connection must be available in order for there to be any web access to the device. To
do so, the device must be connected using an Ethernet cat5e cable or higher with an RJ45 connector. At
the other end of the cable, a device will be connected that is configured within the same IP range as the
device.
2.2 W
EB CONNECTION
The web access to the device is provided through a PC, using one of the supported browsers specified in
Table 1.2.
In order to gain access, the IP address of the device must be entered in the address bar. As specified in
Table 1.3, this IP address can be assigned in 3 different ways.
2.3 U
SER TYPE
There are two user types that are associated with the editing modes that the charger allows. These are
defined by accessing the LDAP server. Table 1.4 is an overview of the available modes and allowed functions.
Mode Allowed functions
View Synoptic, Alarm, Measure, Communications, Device, Parameter and Network values
Viewer Search History
Download XML Configuration
View Synoptic, Alarm, Measure, Communications and Device values
Search History
Download XML Configuration
Administration
View and modify Parameter and Network values
Perform control actions
Update Firmware
2.4 L A
OCAL CCESS
The device has a method for accessing web services by making a direct (local) connection to it.
This mode allows the same actions to be performed as are allowed when accessing remotely, but with the
following characteristics:
No need to have access to an LDAP server to authenticate it
∗
Always accessed with the same IP address (100.0.0.1)
∗
Username/password relationship is predefined
∗
www.premiumpsu.com
Powering Your Challenge
Table 1.1 - Supported browsers
Browser
Mozilla Firefox
Google Chrome
Internet Explorer
Table 1.2 - IP address assignment methods
Value assigned
Assignment type
by default
Remote 200.0.0.1
DHCP Disabled
Local 100.0.0.1
Table 1.3 - Access modes
Communications' Operation Manual
Version
26.0 or higher
29.0 or higher
11.0 or higher
Configurable
YES
YES
NO
EPS Series
MA-5192B-1
07-10-2021
/
4 77