Hansgrohe AXOR Starck Semi-Pro 10820000 Instrucciones De Montaje página 21

Important! The fitting must be installed, flushed
and tested after the valid norms!
Assembly
1 Flush through the supply pipes.
2 Place the mixer including the sealing
washer in position on the sink.
3 Slip the plastic washer, the slide washer,
the metall washer and collar over the hoses
and threaded base and tighten the collar nut
by hand. If there is not enough space,
please use only the slide washer and the
metal washer without the plastic washer.
4 Tighten screws.
5 Connect the supply pipes to the isolation
valves; cold right - hot left.
The hot and cold supplies must be of equal
pressures.
Operation
The handspray is activated by pressing the
button. After releasing the button, the mixer
returns automatically to the standard function.
If the waterflow drops, clean the filter located
between hose and handspray.
English
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Rate of flow:
anti-pollution function
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Maintenance non return valve
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once a
year).
Spare parts see page 3
1 flange for handle
2 handle
3 nut
4 cartridge cpl.
5 aerator cpl.
6 fixing set
7 connection hose
8 hose
9 handspray
10 non return valve
Special accessories
11 extension base
(order as an extra)
max. 1 MPa
0,1 – 0,5
1,6 MPa
max. 80° C
65° C
ca. 11 l/min 0,3 MPa
97466000
10092000
97157000
96339000
13913000
95049000
94082000
97475000
96920000
94074000
97474000
5