Travel Lock; Cleaning And Maintenance; Risk Of Electric Shock; Accessories And Replacement Parts - Beurer SatinSkin HL 76 Instrucciones De Uso

2. Press the release button
3. Place the attachment holder (for shaver attachment)
4. Insert the shaver attachment

Travel lock

The device has a travel lock. If the travel lock is activated, it is not possible to switch on the device. The
travel lock prevents the device from switching on unintentionally (e.g. when being carried in a suitcase).
1. To activate the travel lock, press and hold the ON/OFF button
dicator flashes. The device is now locked. If you press the ON/OFF button
3
is activated, the battery level indicator
2. To deactivate the travel lock, press and hold the ON/OFF button
level indicator flashes. The device is now unlocked.
3

6. CLEANING AND MAINTENANCE

Risk of electric shock!

Unplug the device each time before cleaning. Clean the device using only the methods specified.
1. Do not use any abrasive cleaning products or hard brushes.
2. For better cleaning, the glide attachment
epilation (Figure
E
(Figure ).
G
3. Then remove the epilator attachment
base unit (Figure
1
4. Use the cleaning brush to remove coarse hair from the epilator attachment
shaver attachment)
5. The product is waterproof. Thoroughly clean the epilator attachment
shaver attachment)
6. Do not use the device again until it is completely dry.

7. ACCESSORIES AND REPLACEMENT PARTS

To purchase accessories and replacement parts, please visit www.beurer.com or contact the service
address for your country (see the service address list). Accessories and replacement parts are also
available from retailers. Replacement recommended every 12 months.
Designation
2 x shaver attachments
2 x epilator attachments
and remove the epilator attachment
12
into the attachment holder (for shaver attachment)
10
3
). After shaving, remove the shaver attachment
6
).
D
/ the shaver attachment
9
/ the shaver attachment
9
onto the base unit
9
flashes briefly.
can be removed from the epilator attachment
7
/ the attachment holder (for shaver attachment)
.
10
and the base unit
10
Item number and/or
order number
576.26
576.27
16
from the base unit
6
.
1
for 3 seconds. The battery level in-
2
while the travel lock
2
again for 3 seconds. The battery
2
from the attachment holder
10
/ attachment holder (for
6
/ the attachment holder (for
6
under running water.
1
(Figure ).
1 D
(Figure ).
9 G
after
6
9
from the
9