GBC SmartPunch Plus Manual De Instrucciones De Operación página 13

SmartPunch Plus Punch Die Sets
The SmartPunch Plus uses a variety of easily interchangeable die sets that allow you to punch documents in line for several different binding styles.
By selecting the appropriate die set, you can use your SmartPunch Plus to punch documents in any of the following binding styles. DuraGlide HD
die sets are shown in bold where available.
Die Set Description
For Plastic Comb Binding:
1
PB Plastic Bind; Hole Size: 8mm x 2.9mm (0.313" x 0.116") (LxW); Center-to-Center Hole Spacing: 14.3mm (0.563")
* When the Plastic Comb binding die is used in the 21 hole configuration on A4 width paper (297mm), there is the potential for the outer edge of holes 1 and 21 to be torn. The
theoretical paper edge should be 1.62mm from the edge of the sheet. This event is dependent on paper type, paper width and hole alignment optimization. To avoid this issue, it is
recommended to use a 20 hole configuration instead. 20 hole comb binding supplies are commonly available from GBC and other manufacturers and are considered more optimal
than the 21 hole configuration.
For Twin Loop™ Binding:
1
W3 Wire; Square; 3 Holes per inch; Hole Size: 4mm x 4mm (0.156" x 0.156") (L x W); Center-to-Center Hole Spacing:
8.5mm (0.333")
1
W2 Wire; Rectangle; 2 Holes per inch; Hole Size: 6.4mm x 5.4mm (0.250" x 0.214")(L xW); Center-to-Center Hole Spacing:
12.7mm (0.500")
1
W3 Wire; Round; 3 Holes per inch; Hole Size: 4mm (0.158") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.335")
1
W2 Wire; Round; 2 Holes per inch; Hole Size: 6.5mm (0.0.256") Diameter; Center-to-Center Hole Spacing: 12.7mm (0.5")
For Color Coil™ Binding:
1
C4 Coil; Round; 4 Holes per inch; Hole Size: 4.4mm (0.174") Diameter; Center-to-Center Hole Spacing: 6.3mm (0.2475")
1
C4 Coil; Oval; 4 Holes per inch; Hole Size: 4mm x 5mm (0.158" x 0.197") (L x W); Center-to-Center Hole Spacing: 6.3mm
(0.2475")
®
For Velo Bind:
1
VB Velobind ® ; Round; 1 Hole per inch Hole Size: 3.2mm (0.125") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
1
VB Velobind ® ; Round; 1 Hole per inch Hole Size: 3.2mm (0.126") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
For Loose Leaf Binding:
1
3 Ring Binder; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
1
3 Ring, 5 Ring, 7 Ring; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
1
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 8mm (0.315") Diameter
1
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
4 Ring Binder; Scandinavian (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
©2020 GBC, Lake Zurich, Illinois - All rights reserved.
19-LTR 21-A4
32-LTR 34-A4
21-LTR 23-A4
32-L TR 34-A4
21-LTR 23-A4
44-LTR 47-A4
44-LTR 47-A4
11
12
3
7
4 4
4
Graphics do not represent actual punch pattern dimensions or spacing.
SmartPunch Plus
GBC Part Number
Die, Comb Bind
Die, Comb Bind, HD
Die, Wire 3.1, Sq.
Die, Wire 2.1, Sq.
Die, Wire, 3:1, Rnd.
Die, Wire, 2:1, Rnd.
Die, Coil, Rnd.
Die, Coil, Rnd, HD
Die, Coil, Oval
®
Die, Velobind , 11 Holes, Ltr.
®
Die, Velobind , 12 Holes, A4.
Die, 3 Hole, 8mm
Die, 3 Hole, 8mm, HD
Die, 3/5/7 Hole, 8mm
Die, 4 Hole, 8mm
Die, 4 Hole, 6.5mm
Die, 4 Hole, Scan
GB
TM
WSM7724580
WSM7724588
WSM7724582
WSM7724581
WSM7724584
WSM7724571
WSM7724570
WSM7724586
WSM7724583
WSM7724578
WSM7724579
WSM7724573
WSM7724587
WSM7724574
WSM7724575
WSM7724576
WSM7724577
13