Program The Remote Transmitter - SportDOG X Serie Manual De Funcionamiento

STEP :: 5 PROGRAM THE REMOTE TRANSMITTER
SD-425X-E, SD-825X-E, SD-1225X-E
Your Remote Transmitter has seven operational modes to allow you to select the best match for your type or
style of training. There is also one programming mode (Mode V/T) which allows you to change the system's ID
code. The Remote Transmitter is factory set to mode 5.
TO CHANGE THE MODE
1. Referring to the following table, adjust the Intensity Dial to your desired mode.
2. Turn the Remote Transmitter over and remove the belt clip if attached (SD-825X-E and SD-1225X-E only).
3. Using a pen or the tine on the buckle of your collar strap, press and
release the Mode Button. When the Mode Button is pressed, the
Transmitter Indicator Light will be solid in colour. When it is released, it
will flash the mode selected.
For example, if mode 6 is desired, adjust the Intensity Dial to Level 6. Once the
Mode Button has been depressed, the Transmitter Indicator Light will be solid,
and once the Mode Button is released, the Transmitter Indicator Light will flash
6 times.
10 WWW.SPORTDOG.COM