Vasner Citara Serie Guía De Instalación Y Manual De Usuario página 18

VASNER
Safety:
Should the heater overheat, there is an internal safety switch that will deac-
tivate the heater.
Cleaning, maintenance, service and disposal
Cleaning
Switch off and unplug the heater before cleaning it. Only clean it when it
is cool. When cleaning, use a microfibre cloth and avoid using aggressive
cleaning agents, scouring sponges or stiff brushes. Use commercially avail-
able glass cleaner. Once you have cleaned the heater, allow it to dry before
switching it on again. Never submerge the heater in water.
Maintenance
In general, the heater does not require any maintenance. It must not be
opened by unauthorised persons. If there seems to be a problem, contact
your dealer.
Service and repair
If you notice any damage or a fault with your heater, it must be checked and
repaired by a specialist. Damage or faults arising from unauthorised repairs,
as well as modifications to the heater, misuse, negligence, and improper or
inadequate maintenance void the warranty. Dealers and the manufacturer
shall not be liable.
Disposal
The European Directive 2002/96/EC (Waste Electrical and Electronic Equip-
ment, WEEE) prohibits the disposal of electronic devices in household waste.
Please take the heater to your local recycling centre to dispose of it. The
packaging consists of recyclable materials. Please dispose of the packaging
in an environmentally friendly manner.
Warranty
Our products are subject to strict quality controls. However, if your infrared
heater does not function correctly, we regret this very much and ask you to
18
GB