GE 16 Manual Del Propietario E Instalación página 4

About the temperature control dial.
Turning the dial to
to the refrigerator.
About the fresh food compartment shelves.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
2 Lift up and out
1 Tilt up
Pull forward
To remove the full-width shelves
About the freezer compartment shelves.
1
2
3
4
Temperature Control Dial
The temperature control dial adjust refrigerator from warmest to coldest.
The recommended factory setting is shown in illustration to the left. For colder temperature
Recommened
factory setting
Full-Width Shelves
Some models have a stationary tempered glass
shelf, a spillproof shelf or two steel wire stationary
shelves. These shelves can be moved to another
place in the fresh food compartment.
When placed correctly on the shelf supports, the
shelf will stop before coming completely out of
the refrigerator and will not tilt when you place
food on it or remove food from it.
Spillproof Shelves
Spillproof shelves have special edges
to help prevent spills from dripping
to lower shelves. To remove or replace
the shelves, see the above instructions.
Step Shelf
To remove the step shelf:
Lift left side of shelf slightly.
Move shelf to the left to free its right ends
from holes in the cabinet wall.
To replace the step shelf:
shelf into holes in cabinet wall.
Coldest setting
Lower right side of shelf, move shelf to the
right and take it out.
Lift left side of shelf slightly, swing shelf up,
wall, and lower shelf into place.
Warmest setting