Ordering Information - Protos Integral P1 Manual De Instrucciones

PPI responsible person or Protos. Only original Protos spare parts are permitted
and +standard-compliant.
12. Storage:
Make sure to protect the Protos® Integral ear protectors against exposure to high
temperatures (over + 40° C) and strong sunlight during storage. Storage providing
protection against UV rays and heat (e.g. in the original packaging, not in direct
sunlight) is the best way to keep the material from aging and to increase the
service life of the product. If you do not use your Protos® Integral protective helmet
for a longer time, we recommend leaving the ear protectors in the active position
and setting the pressure to 0.

13. Ordering Information:

Replacement cushions (Art.No. 204062)
sound absorption lining (Art.No. 204059
• Per e-mail to office@protos.at
• Online at www.protos.at
• Oder from an authorized dealer near you
14. Changing the ear piece cushions:
First, remove the ear protection from the helmet shell.
Now place the new pad on the earmuffs and press
down evenly until it engages all around.
GB GB
15. Marking on the product:
1.
2.
3.
4.
For additional information, please contact us at the
following address:
Protos GmbH
Herrschaftswiesen 11
6842 Koblach – Austria
Tel.: +43 5576 98248 0
Firmly hold the ear piece
office@protos.at
in your hand and use
www.protos.at
your index and middle
finger to hook under the
Protos GmbH hereby declares that the P1 earmuff hearing protector complies with
pad from the side. The
PPI Regulation No. (EU) 2016/425. The complete declaration of conformity
pad can be removed by
can be viewed at www.protos.at/ke_p1.
lightly pulling on it.
Certification body:
Institut für Arbeitsschutz der Deutschen
Gesetzlichen Unfallversicherung
Alte Heerstraße 11
D-53757 Stankt Augustin
EU identification number 0121
EN 352 certified standard for Europe
CE logo and test centre identification number
Model designation – where P1K applies when the earmuffs are attached to
the Protos® Integral headset and P1 when installed on Protos® helmet
SNR (single number rating) code for the level of sound insulation
4
3
1
2
Product inspection body:
PZT GmbH
Bismarckstraße 264 B
D-26389 Wilhelmshaven
EU-identification number1974
BA_P1/Rev. 1/20190307
13