FONESTAR SM-3512U Manual De Instrucciones página 4

EN
33.- CD/TAPE TO MAIN: sends the TAPE INPUT to the MAIN MIX.
34.- SOURCE: selection buttons for the signal sent to the cue through headphones and to the CONTROL
ROOM output. The CD/TAPE input, the ALT 3-4 sub mix bus or the MAIN mix bus can be selected.
35.- MAIN/PFL: for selecting the signal sent to the LED STEREO LEVEL DISPLAY indicators.
36.- PHONES/CONTROL ROOM: volume control for the signal sent to the cue through the headphones
and to the CONTROL ROOM output.
26.- STEREO AUX RETURNS 1/2 (EFX): volume control for the
signals connected to the STEREO AUX RETURNS 1 and 2
inputs. If no input is connected, adjust the intensity of the
channel effects sent to the AUX and EFX bus.
27.- MAIN/ALT 3-4: selects the bus sending of the effects
STEREO AUX RETURNS 2 (EFX) to the MAIN mixer bus or the
ALT 3-4 sub mix bus.
28.- AUX SENDS 1/2 (EFX): volume control for the AUX 1 and 2
(EFX) aux sender outputs.
29.- POWER: LED power indicator.
30.- PHANTOM +48 V: activates a +48 V phantom power supply
for the XLR microphone inputs.
31.- LED indicator of phantom power supply activation.
32.- STEREO LEVEL DISPLAY: LED indicators showing the signal
level from the MAIN MIX output or the inputs sent to the PFL
bus. Select the bus to be monitored with the MAIN/PFL
selector.
37.- ALT 3-4: sliding volume control for the ALT 3-4 output.
38.- MAIN MIX: sliding volume control for the MAIN MIX output.
39.- PHONES: stereo output for monitoring through headphones, 6.3
mm stereo jack connector.
- 4 -