Axxess AXTO-TY2 Instrucciones De Instalación página 3

INSTALLATION
With the key in the off position:
1. Locate the factory radio harness in the vehicle and complete all necessary connections to the
aftermarket radio.
2. Connect the 16-pin harness with stripped leads and the AXTO-TY2 harness into the AXTO-
TY2 interface.
3. Connect the AXTO-TY2 harness to the factory radio harness in the vehicle.
PROGRAMMING
• Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.
The factory amplifier should come on and you should hear sound at this point.
• Test all functions of the installation for proper operation, and then reassemble the dash in the
reverse order of disassembly to complete the installation.
3
REV. 4/26/22 INSTAXTO-TY2