Application Field; Electrical Specifications - KPS DCM7000BT Manual Del Usuario

Specifications
General Specifications
Display : 6000 counts.
Overrange Indication : "OL" or "-OL"
Measure : Samples 3 times per second .
Max Conductor Size of JAW : 37mm diameter
Dimensions (W x H x D) : 62mm x 240mm x 41mm
Weight : approx. 430g (including battery)
Low Batteries Indication : Voltage drops below operating voltage
Power Requirement : AA Size Battery x 2 (R6, LR6, 15D, 15A)
Battery Life : 300 hours ALKALINE Battery (without Backlight)
Operating Temperature : -10 ~10°C
Storage Temperature : -20°C to 60°C , 0 to 80% R.H. (batteries not fitted)
Altitude : 6561.7 ft (2000m)
CAT
Ⅱ The circuits directly connected to Low-voltage installation.
Ⅲ The building installation.
Ⅳ
The source of the Low-voltage installation.
Safety : EN 61010-1, EN 61010-2-032, EN 61010-2-033 for CAT III 1000V, CAT IV
600V, EN 61326-1
Drop Protection : 4 feet drop to hardwood on concrete floor
Vibration : Random Vibration per MIL-PRF-28800F Class 2
Pollution degree : 2
Indoor Use

Electrical Specifications

Accuracy is given as ± (% of reading + counts of least significant digit) at 23°C ± 5°C,
with relative humidity Less than 80% R.H., and is specified for 1 year after calibration.
(1) Temperature coefficient
0.2 x (Specified accuracy) / °C, < 18°C, > 28°C
(2) AC Function
ACV and ACA specifications are ac coupled, true R.M.S.
The crest factor may be up to 3.0 as 4000 counts.
Accuracy is unspecified of Square Wave.
For non-sinusoidal waveforms, Additional Accuracy by
Crest Factor (C.F.) :
Max. Crest Factor of Input Signal:
Frequency Response is specified for sine waveform.
LCD displays 0 counts when the reading < 20 counts.
10°C ~ 30°C (≦80% RH),
30°C ~ 40°C (≦75% RH),
40°C ~ 50°C (≦45%RH)

Application field

Add 3.0% for C.F. 1.0 ~ 2.0.
Add 5.0% for C.F. 2.0 ~ 2.5.
Add 7.0% for C.F. 2.5 ~ 3.0.
3.0 @ 3000 counts
2.0 @ 4500 counts
1.5 @ 6000 counts
12
EN
will flash.