Unpacking The Appliance - LG U9C Serie Manual Del Propietário

Unpacking the Appliance

Remove the fixing tape and protective vinyl,
packing material product and its filter before
use.
Removing filter vinyl and
packing material
1
Remove the product from the
packaging and remove the fixing tape
attached to the product.
2
Grab the cover and gently pull to
separate it from the appliances.
• The direction with the Lg logo on
the product display is the front of the
product.
Display
Air inlet(cover)
3
After separating the filter, remove its
protective vinyl.
• When removing the packaged filter,
separate it from the protective vinyl.
14
4
Install the filter in the product.
• Make sure that the handle is facing
upward.
Handle
5
Remove the packing material inserted
at the bottom of the product.
6
Insert the tabs at the bottom of the
cover into the slots in the base of the
appliance and close the cover.
CAUTION
• Be sure to remove the vinyl from the filter
before using the product.
• Pay attention to the direction of the filter
when installing the filter.
• Be sure to remove the cushioning material
before using the product.
EN