LG U9C Serie Manual Del Propietário página 19

N
Preparing to Use the Remote
Controller
1
2
With the front side of the remote
controller facing up, remove the
battery tray by pushing in the
direction of number 2 while pressing
part 1 with a simple tool (cotton
swab, etc.).
②
①
②
①
Insert the battery provided with the
appliance into the tray. Place it with
the + mark facing up.
3
Insert the battery tray back into the
remote controller.
NOTE
• If the remote controller is not operating
properly, check the polarity (+, -) of the
battery or replace the battery before
contacting the service center.
• Separately collect exhausted batteries.
• When using the remote controller, point the
remote controller transmitter toward the
display(status display / remote controller
receiver) on the product.
• The remote controller is not received
properly at a distance of more than 7 m
from the product.
• The remote controller signal reception
may be interrupted when strong lights
such as fluorescent lamps or neon signs
are present. In this case, use the remote
controller in front of the remote signal
receiver of the indoor unit.
Display (Status Display /
Remote Controller receiver)
EN
19