CORBERO CCHSF459W Manual Del Usuario página 59

PART 3
MOUNTING YOUR CHEST FREEZER AND FIRST START-UP
Remove the plastic transportation stiffener elements which have
7.
been placed between the upper lid and the body.
It is compulsory to have an air circulation at the backside so as to
8.
get a satisfying efficiency from the freezer. You should leave at least
20cm space at the sides of your chest freezer.
After mounting the freezer, expect at least for 2 hours without
9.
moving before starting to use it. Then plug your device.
Line voltage and frequency must correspond to the values
written on the label located on the backside of the product. If
the line voltage is too lower or higher than the indicated
values, supply the desired voltage by assuredly using a voltage
regulator. You may consult a qualified electrician in regard to this
issue. The fuse of the wall-socket where your device is plugged must
be 16A maximum.
11