EHEIM aquaclass Serie Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
English
DANGER! Electric shock due to penetrating water!
The LED light is only protected against penetrating water if immersed temporarily.
▶ Note the distance from the underside of the LED light to the highest water mark.
3. Fill the aquarium with water
aquaclass 30:
to a maximum of 2 mm above the lower edge of the cover frame ⑧ (⌦F).
aquaclass 66:
up to the water level indicator ⑨ (⌦G).
7.
Operation
Switching the EHEIM aqua interior filter d and the EHEIM thermopreset aquarium heater e on and off
DANGER! Personal injury or material damage.
▶ Heed the operating manual for the EHEIM aqua interior filter and the EHEIM thermopreset aquarium heater, especially
the chapters on safety, commissioning and operation!
Switching the LED light ⑥ on and off
1. Insert the LED light plug into the power supply unit.
2. Insert the power supply unit's mains plug into the mains socket.
3. Using the button ⑩, switch the LED light on or off (⌦H).
8.
Programming the LED light
Function of the buttons (⌦H)
ON/OFF button ⑩
‧ Switching on/off
The program starts with the daylight phase (100%) when it is switched on
‧ Customer-specific programming: Reduces the pre-set time by one hour with each push of the button
+/- Button ⑫
‧ Dimmer function: Increases or reduces the light intensity
‧ Customer-specific programming: Increases the pre-set time by one hour with each push of the button
‧ Switching on
Upon switching it on, the program restarts at the point on the timer at which the LED light was switched off.
‧ The duration of the sunrise and sunset phases cannot be changed.
‧ Dimming is not possible during the sunrise and sunset phases.
‧ In the event of a power failure, the customer-specific program will be saved for 40 minutes. If the power supply is discon-
nected for longer than 40 minutes, the LED light will start in the pre-set program.
Pre-set program
The program has the following pre-set day/night cycle:
‧ Day phase =
‧ Night phase =
12 hours
Sunrise phase
Daylight phase (100%)
Sunset phase
12 hours
40 minutes
10 hours and 40 minutes
40 minutes
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aquaclass 30Aquaclass 66

Tabla de contenido