Kobalt KCS 1040B-03 Manual De Instrucciones página 6

SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL DEFINITION
V Volts
Direct Current
or d.c.
A danger, warning,
or caution. It means
'Attention! Your safety
is involved.'
Wear eye protection.
Wear protective
gloves.
Do not expose to rain.
Beware of chain saw kickback and avoid contact with bar tip.
General Power Tool Safety Warnings
WARNING
• Read all safety warnings, instructions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks, which may ignite the dust or
fumes.
• Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
SYMBOL DEFINITION
n No-load Speed
0
/min Revolutions or Strokes per Minute
To reduce the risk of injury, user
must read instruction manual.
Wear ear protection.
Wear head protection.
Always use chain saw two-handed.
6