TESY HPWH 2.1 260 U02 S Instrucciones De Uso Y Mantenimiento página 8

The water heater must (in compliance with Article 20 of Standard EN 60335-1) be fixed to the
ground using the fixing bracket provided for this purpose according to Fig 2e.
After having removed the packaging, make sure that the unit is intact. If in doubt, do not use the equipment and seek
help from authorized technical staff.
In conformity with environmental protection regulations, make sure that all the accessories supplied have been
removed before discarding the packaging.
WARNING! Packaging items (staples, cardboard boxed, etc.) must not be left within the reach of
children as they are dangerous.
(*) Note: at the manufacturer's discretion, the type of packaging may be subject to change.
For the entire period in which the equipment remains idle, waiting to be used, it is opportune to protect it from
atmospheric agents. Positions permitted for transporting and handling:
WARNING! During the product handling and installation stages, it is forbidden to put the upper part of
the device under any kind of stress whatsoever due to the fact that it is not of a structural nature.
Positions that are not permitted for transporting and handling purposes:
While handling, do not catch the unit onto upper plastic panels! There is a risk to damage them!
Fig. 2e;
7