Side Mounting - Vetus RCTOPB Manual De Instalación Y Usuario

Top mounting:
• With the help of the supplied drill pattern,sketch the mounting
holes to be drilled and the opening to be sawed out.
• The two brackets on part
Make sure that the mounting holes line up with the sketched
holes.
• Drill the holes and saw out the opening.
• Apply the supplied self-stick spacer
• Assemble the remote control with M5 bolts of the correct length.
• Now assemble part of the housing.
• Grease the axle of the mechanism
desired position (usually vertical).

Side mounting:

The remote control for side mounting requires a space of at least 180
mm (7") behind the shot in order to assemble the entire mechanism.
• With the help of the supplied drill pattern, sketch the mounting
holes to be drilled and the opening to be sawed out.
• Drill the holes and saw out the opening.
• Apply the supplied inseal
inset.
• Attach the mechanism to plate
• Then attach the entire mechanism to the shot with bolts.
• Grease the axle of the mechanism, and mount the lever in the
desired position (usually vertical).
• Provide the bolt M10 with a screwlock (Loctite
• Check the path of the cables.
3 Adjustments
Screw 1 can be adjusted to set the friction for the
gas mechanism, depending on the counter pres-
sure of the throttle.
4 Control
Button 2 can be used to turn off the control of the
gearbox, so that gas can only be given. (For exam-
ple, for starting and warming up the engine.)
When the lever is returned to the neutral position,
the button will pop back out, and the remote con-
trol is ready for normal use.
Mechanical remote engine control
should serve as mounting brackets.
in the correct manner.
, and mount the lever in the
correctly on the back of plate
.
® 243).
• Provide the bolt M10 with a screwlock (Loctite
• Check the path of the cables.
. See
5 Maintenance
• Clean, as necessary, the lever and the housing with
freshwater.
• Check the mechanism for loose components and for
wear of the moving parts on a regular basis.
Apply a water-resistant lubricant to the moving parts
routinely.
• Check the cables and the cable connections for wear
and corrosion on a regular basis.
ENGLISH
® 243).
5
030606.07