Troubleshooting - Active Era WS-01BU-UK Manual De Instrucciones

TROUBLESHOOTING

If you have any trouble with our paddleboard, here is some information
that may be able to help.
WARNING: Perform all of your repairs outside or in a well-ventilated
area. Wear protective gloves/protective clothing/eye protection/face
protection to avoid inhaling glue vapours or contact with skin, mouth
or eyes. Keep the glue away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking. Keep all repair
materials (glue, solvents, etc.) out of reach of children. Read all
WARNINGS and safety advise listed on the Paddle Board Repair Glue
(Polyurethane Resin Adhesive) container prior to use.
CAUTION: The repairs on the welds must not be glued. Only
the manufacturer of the board can perform repairs on the welds
themselves.
Problem
My pump is not
working.
PSI gauge is not
working.
Possible Cause
Damaged or
blocked hose.
The connection
between the pump
and its hose or the
hose and the board
are not secure.
The PSI value will
not usually register
until it reaches 7 PSI.
Solution
Carefully remove
what is blocking it or
replace if damaged.
Check all
connections to
ensure they are
properly fastened.
Continue to pump
until it reaches 7 PSI.
English | 19