Active Era WS-01BU-UK Manual De Instrucciones página 20

Problem
My board has a hole
/ is leaking air.
Note: You can
identify where the
source of the leak
is by putting soapy
water on your board
and observing
where the bubbles
come from.
20 | English
Possible Cause
Valve is leaking.
Punctured Deck.
Solution
Deflate the board
completely and lay
flat. With one hand
hold the valve from
underneath the
board, insert the
valve tightening key
into the valve and
twist clockwise until
fully tightened and
secure.
Once you have
identified the
puncture, deflate the
board completely
and lay flat.
• Prepare a round
patch no less
than 3 inches or
7 centimetres in
diameter.
• Clean the patch
and the area
surrounding the leak
with alcohol.
• To contain excess
glue, use masking
tape to tape off the
area around the
patch.
• Apply 3 thin, even
coats of repair kit
adhesive to both the
surface of the board
and the patch. Wait
5 minutes between
each coat.