Makita BO6040 Manual De Instrucciones página 5

Orbits per min.
Number
1 1,600
2 2,100
3 3,600
4 5,100
5 5,800
003290
CAUTION:
If the tool is operated continuously at low speeds
•
for a long time, the motor will get overloaded and
heated up.
The speed adjusting dial can be turned only as far
•
as 5 and back to 1. Do not force it past 5 or 1, or the
speed adjusting function may no longer work.
The tools equipped with electronic function are easy to
operate because of the following features.
Constant speed control
Electronic speed control for obtaining constant speed.
Possible to get fine finish, because the rotating speed is
kept constant even under load condition.
Soft start feature
Safety and soft start because of suppressed starting
shock.
Selecting the action mode
1
Roto-orbit mode
003292
Use the change lever to change the rotation mode.
Roto-orbit mode is orbital action plus rotation action of
pad for rough sanding and polishing.
Random orbit mode is orbital action of pad for fine
sanding.
1
Random orbit mode
003293
Rotate the change lever counterclockwise for roto-orbit
mode and clockwise for random orbit mode.
All manuals and user guides at all-guides.com
Roto-orbit pad rotating
speed per min.
180
Typical applications for sanding and polishing
240
420
590
670
1. Change lever
003294
The above information is intended only as a guide. In
each case, the most appropriate sanding disc grain
should be determined by preliminary trials.
ASSEMBLY
Installing side grip (optional accessory)
1. Change lever
003297
Remove one of the screws which secure the head cover.
Screw the side grip on the tool securely. The side grip
can be installed on either side of the tool.
5
CAUTION:
Do not rotate the change lever when the tool is
•
running. The tool will be damaged.
Sanding
Use/Material Mode selection
Paintwork:
Sanding Random
Repairs Roto-orbit/
(scratches, rust spoots) Random
Rough paint stripping Roto-orbit
Plastics:
Soft plastics Roto-orbit/
(PVC/ABS) Random
Hard plastics Roto-orbit
(FRP)
Woods:
Softwood Random
Hardwood Roto-orbit/
Random
Veneers Random
Metals:
Non-ferrous metal Roto-orbit/
(aluminum, copper) Random
Steel Roto-orbit
Steel,rust removal Roto-orbit
Hard metal Roto-orbit
(stainless steel)
Polishing
Mode selection Speed control
Use/Material
Applying wax Roto-orbit
Removing wax Roto-orbit
Polishing Roto-orbit
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the tool.
1
Speed control
Pad
setting
1 - 3 Soft
2 - 3 Hard
4 - 5 Soft
1 - 3 Super soft/
Soft
1 - 3 Soft/Hard
1 - 3 Super soft/
Soft
3 - 5 Soft
1 - 2 Super Soft
1 - 3 Soft
3 - 5 Soft/Hard
4 - 5 Super Soft
4 - 5 Soft
Pad
setting
2 - 4 Sponge pad
4 - 5 Felt pad
4 - 5 Wool pad
1. Side grip