Makita VC001GL Manual De Instrucciones página 14

Connections with your work tools
(Country specific)
By connecting the vacuum cleaner to any available
work tools compatible with the cleaner, it works as a
dust extractor for your power tools.
Select one of the front cuffs or joints (optional acces-
sories) as most suitable for your tool model. Place the
cuffs or joint, as necessary, between the front end of the
cleaner hose and a dust extraction port of your tool.
2
Fig.25
► 1. Front cuffs or joint 2. Cleaner hose 3. Power tool
4. Vacuum cleaner
Installing or removing cleaner
attachments
CAUTION:
After installing an attachment,
check if it is securely installed. If the attachment
is installed imperfectly, it may come off and cause
personal injury.
Attachments without lock function
Optional accessory
Insert an attachment into the suction inlet of the cleaner
by pushing and hand screwing it in place.
Hand twist and pull the attachment apart from the suc-
tion inlet after use.
Fig.26
1
4
3
Attachments with lock function
Optional accessory
NOTICE:
When installing the attachment with
lock function, be sure to align the release button
with the hook on the attachment. If they are not
aligned, the attachment will not be locked and may
come off from the cleaner.
Insert an attachment into the suction inlet of the cleaner
by pushing them together with a click.
To remove the attachment, pull it off while pushing the
release button.
Fig.27
► 1. Suction inlet with lock function 2. Release button
3. Attachment with lock function
NOTE: An attachment with lock function can only be
installed in the suction inlet with lock function.
1
Fig.28
► 1. Attachment with lock function 2. Suction inlet with
lock function 3. Suction inlet without lock function
14 ENGLISH
1
3
2
2
3