Service And Maintenance; Technical Specifications - Zzipp ZZSNOWJET Manual Del Usuario

SERVICE AND MAINTENANCE

Only use professional high quality snow liquid for the ZZSNOWJET. The
machine is tested and calibrated with snow liquid only to get the best output
performance. Warranty will be void if any other type of liquid is used, improper use of
liquid may lead to machine failure and malfunction.
1. Do not allow the machine to become contaminated.
2. Remove dust from air vents with air compressor, vacuum or a soft brush.
3. Only use a damp cloth to clean the case.
4. Before storing run distilled water through the system to help avoid malfunctions of
the pump or heater.
5. It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
6. Excessive dust, liquid and dirt built up will degrade performance and cause
overheating.
7. Before storing after operation, pump pure water through the system for at least 1 to
2 minutes. This will help clean out the remaining snow fluid and prevent pump from
malfunction on next usage.

TECHNICAL SPECIFICATIONS

Input Voltage
Rated Power
Fluid Consumption
Fluid tank capacity
Ambient Temperature
Control
DMX Channels
Dimension
Weight
6
220-240 V, 50/60 Hz 3.8A
900W
400m/min
20 liters
5°C-40°C (41°F-104F)
Manual, Timer, DMX 512, Wireless
2 channels
590 x 550 x 650 mm
37kg