Intended Use - Maxtec BlenderBuddy 2 Instrucciones De Uso

Maxtec
2305 South 1070 West
Salt Lake City, Utah 84119
USA
NOTE: The latest edition of this operating manual can be downloaded from our website at www.maxtec.com
WARRANTY
Under normal operating conditions, Maxtec warrants the BlenderBuddy 2 to be free from
defects of workmanship or materials for three (3) years from receipt. Warranty does not cover
breakage/abuse.
These warranties are from the date of receipt, provided that the product is properly oper-
ated and maintained in accordance with Maxtec's operating instructions. Based on Maxtec
product evaluation, Maxtec's sole obligation under foregoing warranty is limited to making
replacements, repairs, or issuing credit for equipment found to be defective. This warranty
extends only to the buyer purchasing the equipment directly from Maxtec or through Maxtec's
designated distributors and agents as new equipment. Routine maintenance items, such as
O-rings, are excluded from warranty. Maxtec and any other subsidiaries shall not be liable to
the purchaser or other persons for incidental or consequential damages or equipment that
has been subject to abuse, misuse, mis-application, alteration, negligence or accident. These
warranties are exclusive and in lieu of all other warranties, expressed or implied, including
warranty of merchantability and fitness for a particular purpose.
For product warranty returns, please contact Maxtec Customer Service for a Return Material
Authorization (RMA).
DESCRIPTION
The BlenderBuddy 2 is an accessory designed for use with air/oxygen blenders. It utilizes a
Maxtec Designed for Blenders (DFB) flowmeter which is designed and calibrated specifically
for air/oxygen blenders to provide increased accuracy compared to standard flowmeters. By
utilizing dual-scale graduations, the flowmeter provides two flowmeters in one for increased
accuracy at lower flows. The flowmeter features a high-quality acrylic block body and preci-
sion valve. The BlenderBuddy 2 also provides a sensor analysis port which may be used to
measure the gas concentration from the blender. A small continuous sensor bleed is provided
which enables gas analysis regardless of which outlet port is used on the blender.

INTENDED USE

The BlenderBuddy 2 is a flowmeter intended for use with an air/oxygen blender and is to be
used by physicians, respiratory therapists and other authorized hospital personnel to adminis-
ter selected doses of medical gases to a patient The BlenderBuddy 2 also contains a gas analy-
sis port which may be used with a suitable oxygen analyzer to measure the gas concentration.
WARNINGS
Read this User Manual before installing or operating the BlenderBuddy 2.
◆
This manual instructs a professional to install and operate the BlenderBuddy 2. This is pro-
◆
vided for your safety and to prevent damage. If you do not understand this manual,
NOT USE the BlenderBuddy 2 and contact your provider.
Use BlenderBuddy 2 only for its "Intended Use" as described in this manual.
◆
This product should only be used under proper supervision of a healthcare professional.
◆
The BlenderBuddy 2 is for use with air/oxygen blenders only. The accuracy of the flowmeter
◆
will be affected if the BlenderBuddy 2 is used in any other way.
Follow all manufacturer instructions for proper air/oxygen blender and bleed operation.
◆
ENGLISH
phone: (800) 748.5355
fax: (801) 973.6090
email: sales@maxtec.com
web: www.maxtec.com
DO
ALWAYS activate the blender bleed when necessary according to the blender manufacturer
◆
instructions. Failure to do so may result in inaccurate concentrations from the blender.
The flowmeter is capable of delivering flows greater than the indicated value (flush flow).
◆
Adjusting the flow beyond the indicated range will result in an undetermined flow.
The BlenderBuddy 2 is capable of delivering gas mixtures at pressures equal to the blender
◆
outlet. Always confirm proper setup before patient use.
Check for leaks and proper operation before placing the BlenderBuddy 2 into service.
◆
ALWAYS confirm prescribed flow and oxygen concentration before administering to patient
◆
and monitor on a frequent basis.
The BlenderBuddy 2 may contain magnetic, ferrous material and is NOT for use in MRI
◆
environments.
DO NOT connect to source pressure greater than 100 psi.
DO NOT disassemble the BlenderBuddy 2 while pressurized.
DO NOT use substitute parts.
DO NOT use lubricants on O-rings.
DO NOT use the BlenderBuddy 2 if you suspect components are damaged, altered, or
missing. Inspect unit before each use.
To Reduce the Risk of Fire or Explosion:
ALWAYS follow ANSI and CGA standards for Medical Gas Products and Oxygen Handling.
◆
DO NOT use or store oils, greases, organic lubricants or any combustible materials on or
near the BlenderBuddy 2.
DO NOT use near any type of flame or flammable/explosive substances, vapors or
atmosphere.
DO NOT smoke in an area where oxygen is being administered.
CAUTION
The BlenderBuddy 2 must be operated with the Flowmeter in a vertical, upright position.
◆
Gas temperatures other than 70° F (21°C) may affect the accuracy of the indicated flow.
◆
DO NOT drop the BlenderBuddy 2.
DO NOT attempt to sterilize the BlenderBuddy 2
DO NOT clean with aromatic hydrocarbons.
DO NOT immerse the BlenderBuddy 2 in any kind of liquid.
DO NOT over-tighten knob when turning off. This may damage the flow meter.
DO NOT occlude or plug the gas sensor port.
2
WWW .MAXTEC .COM • (800) 748-5355