Cleaning And Maintenance - Beko HCA62320W Manual De Usuario

Ocultar thumbs Ver también para HCA62320W:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 68
4

Cleaning and Maintenance

Prior to cleaning and maintenance, unplug the appliance or
turn the main swich off or loosen the fuse that supplies the
hood.
Failure to comply with the provisions relating
to cleaning of the device and replacement
A
of filters may cause fire risks. It is therefore
recommended to comply with the guidelines
given herein. The manufacturer is not liable
for any damage to the engine or fires caused
by improper use.
Clean using only a cloth dampened with neutral liquid
detergent. Do not clean with tools or instruments. Do not use
abrasive products. Do not use alcohol
4.1 Cleaning of Aluminium Grease Filter
This filter captures oil particles in the air. You are recommended
to clean your filter every month under normal usage conditions.
First remove the grease filters for this process. Wash the filters
with liquid detergent and rinse them with water and install
them back after they get dry. Aluminium grease filters may
get discolered as they are washed; this is normal and you don't
need to change your filter.
1
Fig. 5
Hood / User Manual
4.2 Changing of Carbon Filter (Air Circula-
tion Mode)
The hood can be fitted with an active carbon filter. The carbon
filter is applied only in case the hood is not connected to the
vent duct.
In any case it is necessary to replace the carbon filter at least
every three months.
2
C
You can wash the grease filter in the
dishwasher
2
2
1
1
2
A
:
WARNING
The carbon filter is never
washed.
A
:
WARNING
Carbon filter is available from
Authorized Services.
2
1
1
2
Fig. 6
9 / EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hca62320bHca62320whHca62320bh

Tabla de contenido