B
Using the appliance
Air flow in m3/h measured at maximum efficiency point (Qbep)
Air pressure in Pa measured at maximum efficiency point (Pbep)
Electric power input in W measured at maximum efficiency point (Wbep)
Nominal power in W of lighting system (Wl)
Average brightness in lux of lighting system on cooking surface (Emoyen)
Technical features
Rated supply (voltage in V, type of current & frequency in Hz)
Electrical protection class
Rated motor supply in W
Number and type of lights
Lighting power in W by light / total
Lights replaceable by the user
Total rated power in W
Maximum air flow in m
/h
3
Lighting
Code ILCOS D
8
225.5
181.1
33.6
3.0
70/78
220-240 ~ 50
Class I
85
2 x LED modules
1.5 / 3
No
88
467.2
DSR-1.5-S-68 (12 V)
EN
B
Using the appliance
Wall mounting installation
Prepare for installation
f you have an outlet to the out side, your cooker hood can be connected as below picture by means
of an extraction duct (enamel, aluminum, flexible pipe or inflammable material with an interior
diameter of 150mm)
Before installation, turn the unit off and unplug it from the outlet.
The cooker hood should be placed at a distance of 65~75cm above the cooking plane for best effect.
9
EN