Resistance Measurement - PCWork PCW03A Manual Del Usuario

Resistance Measurement

1. Press the button to turn on the device. Insert the red probe
into the
"COM" input socket. Let the probe's tips touch one another, to
check whether they are correctly connected. The indicator light
should turn green and the buzzer sound.
2. Press the "AUTO/FUNC" button and choose the
3. Connect the probes' tips (red probe is the positive pole, black
probe is the negative pole) to the measuring object, measure
the resistance.
4. The measurement result is displayed on the screen.
5. When measuring large resistors (>1MW), it can take a few
seconds for the measurement result to be stabilized. If the
screen shows "OL", the measurement range has been
exceeded or the measuring circuit is defective.
input socket and the black probe into the
18
function.