9. Install the AC Single Supply
IMPORTANT! Verify that you are following the correct power system installation
based on your model number. For a multi-output AC supply power unit installation,
refer to "Install AC Multi-Output Supply". For a hard wire power installation, refer to
"Hard Wire Installation".
Unthread the control box screws to remove the control box cover.
Connect the power cords.
Plug the AC supply into the wall outlet.
Secure any excess wire under the deck.
Secure the control box cover to the control box.
IMPORTANT! The area in front of the sensor must be free of objects during the 2
minute learning cycle or the faucet may not function properly.
1386433-2-B
Power
Cord
LED
14
AC Supply
Kohler Co.